Sign In | Join Free | My himfr.com
Home > Radar Level Transmitter >

Modbus Flat Radar Level Transducer PFA PTFE Corrosion Crystallization Condensation Occasions

Xi'an Dehou Electronic Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap Modbus Flat Radar Level Transducer PFA PTFE Corrosion Crystallization Condensation Occasions from wholesalers
     
    Buy cheap Modbus Flat Radar Level Transducer PFA PTFE Corrosion Crystallization Condensation Occasions from wholesalers
    • Buy cheap Modbus Flat Radar Level Transducer PFA PTFE Corrosion Crystallization Condensation Occasions from wholesalers
    • Buy cheap Modbus Flat Radar Level Transducer PFA PTFE Corrosion Crystallization Condensation Occasions from wholesalers

    Modbus Flat Radar Level Transducer PFA PTFE Corrosion Crystallization Condensation Occasions

    Ask Lasest Price
    Brand Name : NUOYINGJIAYE
    Model Number : NYRD-PB-E
    Certification : Explosion-proof certificate
    Price : $400 to $1800
    Payment Terms : T/T
    Supply Ability : 300 pcs/ pre month
    Delivery Time : 7 work days
    • Product Details
    • Company Profile

    Modbus Flat Radar Level Transducer PFA PTFE Corrosion Crystallization Condensation Occasions


    26GHz NYRD-PB-E Flat Radar Level Meter


    The flat-panel radar level meter is a 26GHz high-frequency radar level measuring instrument with a maximum measurement distance of 40 meters. The antenna is further optimized, and the new fast microprocessor can perform higher-speed signal analysis and processing, so that the instrument can be used in some complex occasions such as steam, foam, dust, crystallization, condensation, etc..


    Radar Level Meter Technical Parameter


    ModelNYRD-PB-ANYRD-PB-BNYRD-PB-CNYRD-PB-DNYRD-PB-E
    Typical applicationSteam, mist, foam, strong corrosion, crystallization, condensation, adhesion, etc.
    Transmit frequency26GHz
    Echo sampling100 times/s
    Antenna materialPTFE+304PTFEPTFE+304PTFE+304PFA
    Range40m
    Accuracy0.05%~0.1%F.S
    Supply power24VDC(Two-wire,Four-wire), 220V AC
    Power3W
    Signal output4...20mA/HART/RS485/Modbus...
    Process temperature-40~+130℃-40~+130℃-40~+260℃-40~+130℃-40~+130℃
    Process pressure-0.1~2.0MPa
    Process connectionBracket, flange (optional)
    Electrical InterfaceM20×1. 5, ½ " NPT
    Protection classIP 67
    Explosion-proof gradeExiaⅡCT6 Ga, ExdⅡCT6 Gb

    Note: Products can be customized according to the specific requirements of users!


    Radar Level Meter Operating Principle


    The radar level antenna emits narrow microwave pulses, which are transmitted downward through the antenna. After the pulse touches the surface of the measured medium, it is reflected back and received by the antenna system again, and the signal is transmitted to the electronic circuit part and automatically converted into a level signal (because the pulse propagation speed is extremely fast, the electromagnetic wave reaches the target and is reflected back to the receiver. The time taken is almost instantaneous).


    Radar Level Meter Design Features


    ◎ The antenna is small in size, easy to install; non-contact radar, no wear and no pollution.

    ◎ Unaffected by corrosion, foam, water vapor, temperature and pressure changes.

    ◎ The beam angle is small and the energy is concentrated, which enhances the echo ability and helps to avoid interference.

    ◎ The measurement blind area is smaller, and it can also achieve good results for small tank measurement.

    ◎ High signal-to-noise ratio for better performance even under fluctuating conditions.

    Radar Level Meter Electrical connections
    Supply voltage
    (4~20)mA/HART(Two-wire
    The power supply and the output current signal share a two-core shielded cable. Refer to the technical data for the specific supply
    voltage range. For the intrinsically safe type, a safety barrier must be added between the power supply and the instrument.
    (4~20)mA/HART(Four-wire)
    The power supply and the current signal are separated, and each uses a two-core shielded wire. Refer to the
    technical data for the specific supply voltage range.
    RS485/Modbus
    The power supply and the Modbus signal are separated, and each uses a two-core shielded wire. Refer to the
    technical data for the specific supply voltage range.
    Connection method
    Radar Level Meter Protection Class
    This instrument fully meets the requirements of protection class IP66/67. Figure 6:
    • How to Ensure Your Installation Meets IP67 Requirements:
    • Make sure the sealing head is not damaged.
    • Make sure the cable is not damaged.
    • Make sure that the cables used meet the electrical connection specifications. Bend the cable down before entering the electrical interface to ensure that water does not flow into the housing, see ①
    • Please tighten the cable gland,see②
    • Please plug the unused electrical connections with blind plugs, see ③
    Radar Level Meter Instrument debugging
    The instrument has three debugging methods, as follows:
    Method 1:Display/Key
    The instrument is debugged through the 4 buttons on the display screen. (Figure 7) ①LCD; ②Button.
    Method 2:Host computer debugging
    Connect to the upper camera through HART (Figure 8)
    ①RS232 Or USB;②Radar level meter;③HART adapter;④250Ωresistance
    Method 3:HART handheld programmer programming
    HART handheld programmer (Figure 9)
    ①RS232 Or USB;②Radar level meter;③250Ωresistance

    Quality Modbus Flat Radar Level Transducer PFA PTFE Corrosion Crystallization Condensation Occasions for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Xi'an Dehou Electronic Technology Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)